crown macro-tech 24 x 6

3 stuks crown macro-tech 24 x 6 in perfect werkende staat
kunnen weg aan 1000euro voor de drie stuks

Load Impedance: Safe with all types of loads,
even reactive ones. Rated for 2 to 16 ohms.
Voltage Gain to 8-ohm load at rated output at
1 kHz, maximum level setting:
Channel 1 (2400): 83:1 ±6% or 38 dB ±0.5
dB at 0.775-volt sensitivity; 46:1 ±6% or 33 dB
±0.5 dB at 1.4-volt sensitivity.
Channel 2 (600): 54:1 ±6% or 35 dB ±0.5 dB
at 0.775-volt sensitivity; 30:1 ±6% or 30 dB
±0.5 dB at 1.4-volt sensitivity.
20:1 ±6% or 26 dB ±0.5 dB at +26 dB sensitivity.
Required AC Mains: All units require 90 watts
or less at idle. Current, voltage and frequency
requirements are provided on the unit’s back
panel.
AC Line Connector: NEMA 5-15P.
Performance
Frequency Response: ±0.1 dB from 20 Hz to
20 kHz at 1 watt.
Phase Response: ±10 degrees from 10 Hz to
20 kHz at 1 watt.
Signal-to-Noise Ratio, 20 Hz to 20 kHz:
Better than 105 dB A-weighted or 100 dB
unweighted below rated full bandwidth power.
Total Harmonic Distortion (THD): At full bandwidth
power, less than 0.05% from 20 Hz to
1 kHz increasing linearly to less than 0.1% at
20 kHz.
Intermodulation Distortion (IMD): (60 Hz and
7 kHz at 4:1) Less than 0.05% from 10 milliwatts
to full bandwidth power.
Damping Factor: Greater than 1,000 from 10
Hz to 400 H

Crown Macro-Tech 24x6 heeft ch. 1 @ 2400 watt en ch 2 @ 600 watt. Dit is perfect om sub- en topcabines aan één kant stereo te laten draaien of allemaal met een monoluidsprekeropstelling