Zeer solide on-camera mixer met hoogwaardige pre-amps voor 2x mono of 1x stereo input voor zowel TRS of XLR (met 48V phantom power).

Volledig metaal design.
TRS-kabel en USB-kabel meegeleverd.
Hot/Cold-shoe mount beschikbaar.

Inputs:
- 3x TRS: left, right en stereo
- 1x XLR: 48V phantom power switch, can be recorded to right channel, or both left and right at different gain, effectively creating a safety channel
- XLR is 3-pin neutrik connector, with lock

Output:
- high quality and low-noise (around -70dB self noise)
- stereo out TRS

Monitoring:
- headphone jack for monitoring with adjustable volume knob
- has monitor input to monitor from the recording device or camera using the volume knob (no need to adjust volumes in the menu of the camera)

Extra features:
- each channel has separate gain setting:
- high and low gain
- gain adjustment per channel
- can record in mono or stereo
- even when the input uses only one channel (L or R), when setting the output to mono, the signal passes through the L/R gain meters separately, which gives you the opportunity to record one input at two levels, providing a safety track to prevent saturation/clipping in case there are unexpectedly loud noises!

Power:
- has in-built battery which runs up to 10h with phantom power on, I don't know how long it will run without phantom power
- when battery is empty, the mixer can be used during charging!
- I have two of these, this item is my backup one which has only been used a few times, the battery is still fairly new!

Mounting options:
- 1/4” screw on top
- 1/4” hole in the bottom
- cold shoe slots on the sides

Dimensions:
- width: 10 cm
- height: 4 cm
- depth: 7,5 cm (9 cm including knobs)
- top screw sits 1,5 cm from front panel (makes front panel more or less flush with back of a camera when mixer is mounted underneath, leaves also room on the side to access battery door of camera, so you don't need to unscrew the mixer to change batteries)
- bottom screw hole sits 2,5 cm from front panel