HF linear 2kw 1.8 MHz - 30 MHz in perfecte staat.

The linear amplifier OM2000 HF is designed for all short wave amateur bands from 1.8 till 29 MHz (including WARC – bands) and all modes. It is equipped with a ceramic tetrode GU84b.
Specification of OM2000 HF:
Frequency coverage: amateur bands 1.8 – 29.7 MHz including WARC
Power output: 2000+ W in SSB and CW
1500+ W in RTTY, AM and FM
Driver Power: usually 40 to 60 W for full Output Power
Input impedance: 50 Ohm VSWR < 1.5 : 1
Output amplification: 17 dB
Output impedance: 50 Ohm unbalanced
Maximum output SWR: 2:1
SWR protection: automatic switching to STBY when reflected power is 350W or higher
Intermodulation distortion: 32 dB below nominal output
Suppression of harmonics: < -50 dBc
Tube: GU84b Ceramic tetrode
Cooling: Centrifugal blower
Power supply: 1 x 230 V – 50 Hz one phase
Transformers: 1 pc of toroidal transformer 2,5 kVA
Protection circuits: – SWR too high
– Anode current too high
– Screen current too high
– Grid current too high
– Mistuning of power amplifier
– Hot switching protection
– Soft start for protecting your fuses
– “switch –on blocking “ at opened amplifier
Bar graph indications: – Power output – bargraph 50 LED
– Reflected power – bargraph 20 LED
– Current at screen ( Ig2 – bar graph 10 LED )
– Anode voltage, anode current, tuning – bargraph 30 LED
LED indicators: – grid current ( Igl – 2 LED )
– WAIT – preheating of tube (180 sec )
– STBY– standby
– OPR – operating condition
– FAULT – failure, switching off for abt. 2 sec
Parameters: 485 x 200 x 455mm (width x height x depth)
Weight: 28 kg