ZachTek WSPR receiver voor 20m band (via WSJT-X & WSPRNET)
651sinds 30 jun. '25, 11:40
€ 35,00
Ophalen of Verzenden
Verzenden voor € 8,50
Kenmerken
ConditieZo goed als nieuw
TypeOntvanger
Beschrijving
Aangeboden:
ZachTek 20m band WSPR receiver (ontvanger)
Geen instelsoftware of andere tools nodig!
Werkt direct via de audiouitgang rechtstreeks met WSJT-X en WSPRNET(dot)ORG
In absolute nieuwstaat!
Nieuwprijs incl. BTW / excl. verzendkosten € 95,00
Wordt geleverd compleet met USB kabel in originele verpakking.
Quick Guide for WSPR Receiver:
Hooking up the WSPR Receiver to a computer.
1. Connect the "Audio Out" from the receiver to a line-in or microphone input on a computer using the included audio cable.
2. Connect a HF antenna to the SMA connector marked "Antenna Input".
3. Connect a 5V power source to the micro USB connector using the included USB cable. You may use an unused USB port on the computer to power the receiver.
Configure the computer software.
1. Start the appropriate WSPR receive software on the computer like the software "WSJT-X".
2. Configure the software to use the correct soundcard and adjust the volume using the sound mixer adjustment.
3. Select the appropriate Ham band and if you intend to send your report to the WSPR network, make sure to enter you Ham radio call sign and position in the settings as well.
4. Tick the "Upload spots" option.
5. Done!
The receiver is designed to be maintenance free and "plug-andplay" so there are no settings or adjustments that needs to be done on it and once the computer program and the volume have been properly set there is nothing to adjust.
The receiver will always be on frequency and should give many years of trouble free operation. You can find more info on the website zachtek /1010
Verzenden k.k. of afhalen in Den Haag (Kijkduin) NL
ZachTek 20m band WSPR receiver (ontvanger)
Geen instelsoftware of andere tools nodig!
Werkt direct via de audiouitgang rechtstreeks met WSJT-X en WSPRNET(dot)ORG
In absolute nieuwstaat!
Nieuwprijs incl. BTW / excl. verzendkosten € 95,00
Wordt geleverd compleet met USB kabel in originele verpakking.
Quick Guide for WSPR Receiver:
Hooking up the WSPR Receiver to a computer.
1. Connect the "Audio Out" from the receiver to a line-in or microphone input on a computer using the included audio cable.
2. Connect a HF antenna to the SMA connector marked "Antenna Input".
3. Connect a 5V power source to the micro USB connector using the included USB cable. You may use an unused USB port on the computer to power the receiver.
Configure the computer software.
1. Start the appropriate WSPR receive software on the computer like the software "WSJT-X".
2. Configure the software to use the correct soundcard and adjust the volume using the sound mixer adjustment.
3. Select the appropriate Ham band and if you intend to send your report to the WSPR network, make sure to enter you Ham radio call sign and position in the settings as well.
4. Tick the "Upload spots" option.
5. Done!
The receiver is designed to be maintenance free and "plug-andplay" so there are no settings or adjustments that needs to be done on it and once the computer program and the volume have been properly set there is nothing to adjust.
The receiver will always be on frequency and should give many years of trouble free operation. You can find more info on the website zachtek /1010
Verzenden k.k. of afhalen in Den Haag (Kijkduin) NL
Zoekertjesnummer: m2284214600
Populaire zoektermen
zenders en ontvangershfyaesuicomkenwoodyaesu fttransceiverradio amateurzendamateurham internationalacomyeasukenwood ts 50swr metercarvan in Caravans en Kamperenkerstlampjes in Diversenduvel cincinnatioprit poortenkoersfiets grote maat in Racefietsenvoiliere panelen in Dieren en Toebehorendesign klapstoelbadrekjebmw e30 tellerbakaudi velgen 22 inch in Auto-onderdelen