Snow Performance Stage 2 Boost Cooler / Water Methanol Kit (

Snow Performance Stage 2 Boost Cooler / Water Methanol Kit (Turbo | Diesel)

LET OP!

Deze kit is beschikbaar in 2 verschillende types.

1. Boost Cooler Stage 2

Complete Water-Methanol Injection kit with variable injection for all Turbdiesels up to 2.1 bar boost. Typcially used on VAG TDI, BMW, PSA HDi or similar engines.

This kit progressively injects more or less water or water/alcohol, according to manifold boost pressure. Includes a simple handheld display screen to set your injection points, this water injection controller can be remotely mounted or placed in a convenient place to access based on your application.

• Boost controlled progressive Water Methanol Engagement & Monitoring
• Systems for virtually any turbo diesel (TDI/TDCi/TDS/etc.) of approx. 80 - 1000+ hp.
• More power and torque possible of up to 15-25%
• Reduction of the thermal loading in already modified turbo diesel, such as chip tuning.
• Reduction of exhaust gas temperature (EGT) of up to 120° C - ideal for tuned engines or trucks.
• No charging pressure loss as in conventional intercooler, highly efficient! Additional cooling of the charge air of up to 60° C possible.
• Reduction of specific fuel consumption by up to 10-15%
• Reduction of nitrogen oxide formation & carbon emission with full load acceptance, ideal add-on to DPF.
• Deposit free combustion chamber and air intake, without formation of carbon.
• Individual consulting and configuration are possible.
• Easy installation
  

2. Boost Cooler Stage 2 Power-Max

The latest development from Snow Performance!
Complete kit with freely programmable 52mm OLED-gauge and optionally Dual Stage Technology.

Fits to all Turbodiesel Engines up to 3.5bar boost.

• Boost referenced injection control, for use with all turbodiesel engines
• System for virtually any turbo diesel (TDI/TDCi/TDS/etc.) of approx. 80 - 2,000 hp, up to 3.5bar
• Complete with our industry leading 300 PSI UHO pump and Hypersonic Nozzles?
• Dual Stage Technology
• 2 nozzle control independently of one another
  (Optional, Upgrade Art.No.: SP10350 required)
• 52mm gauge style progressive water-methanol controller
• Dual tone 7 color OLED screen
• Efficient Intercooling, up to 60°C lower air intake temperature
• Achieve approx. 116-Octan rating, by using ordinary 95-Octan gasoline
• Reduces EGT and oil temperatures
• Allows you to run safely more boost and/or more timing
• Reduces thermical stress on NOS, LPG/Autogas and pre-tuned engines like chiptuning & higher boost levels
• No wear issues, only clean combustion chambers
• No loss of boost as with an intercooler
• Reduces the specific fuel consumption
• Easy installation

More Power by Boost Cooler

With the Boost Cooler, you can achieve up to 10% extra power for suction engines. The optimal cooling compensates for power losses at higher outside temperatures. In addition, deposits in the combustion chamber and intake manifold are reduced.

116 Octane Race Gas Performance

Water or water/methanol is injected into the intake air using the patented high-pressure pump. The evaporation mist achieves extremely effective intake air and intercooling, whereby, among other things, an uncontrolled combustion ( knocking ) is prevented. The effect is demonstrably comparable with 116 octane racing gasoline.

Dual Stage Technologie (DST)

The Stage 2 has the ability to progressively command 2 Hyper-Sonic Nozzles independently of one another. This sophisticated dual stage injection management yields the highest increases in HP and cooling along all stages of the engine allowing you to greatly increase the boost & timing of your vehicle safely.

Universeel